Stitch

After a "carving free" summer, I finally made the time to finish Stitch. Stitch presented me with somewhat of a dilemma last spring. As with all projects, you start out with a sketch and proceed to reduce the bulk of the project so that you can begin to "see" the general project shape.

From there you begin to cut away anything that doesn't look like "Stitch!"

You can see my dilemma in the above photo. Stitch's left paw and foot were in serious trouble. I had cut too much away! Over the summer I dreaded trying to complete Stitch with such a mistake. (You might say I developed "carvers block!") I had to restore a large enough section of wood to the paw and foot area that would allow me to match his right paw and foot. "Surgery" was in order! I cut away the left paw and foot to make a 90' wedge that would allow me to glue a similar shaped "chunk" of wood into the area.

Ready for color, Stitch's left foot and paw "surgically" repaired put me back on track for finishing.

With mimimal mess, Stitch is just about ready. All that's needed is his "protective" coat.

Stitch made it through his "surgery" in great condition and was given to his new owner where he will have a special place of honor.

The next "One of a Kind Wood Carving" is ..."Megara"

Whittling in the '60's

My first year as a YMCA Resident Camp Counselor introduced me to "whittling." My mentor and friend, Jim Goodwin II was a man of many talents. All of which he shared with anyone and everyone he could. At first, I admired the fact that he could have our youngest campers handling and working with an Exacto knife with confidence in very short order.
Thanks to my Dad, I am somewhat artistic and can visualize three dimensional aspects of objects to be carved or drawn. Seeing my first wood carving of a ball cut into a box out of a solid piece of wood did it for me. I was hooked. Here is a sampling of my pieces "whittled" in the mid 1960's.
The "Rabbit in the Wood" is one of my first pieces.
"Four balls in a cage" fascinated me to no end. I saw it in one of the whittling books Jim provided us with. Like many carvers, my first pieces are unpainted and not sanded. Some prefer the knife cuts for that "carved look." As you can see, the one thing I could have done is stain or protect the wood. Well, I didn't, I think all the handling and aging has given them a patina for protection. Most of my first pieces were carved with a Swiss Army knife. That "multi-purpose" knife went with me as I headed to Florida and Iceland for my tour of duty in the Naval Reserve. While waiting for a clearance to continue my Naval training, I was assigned a "Gate Guard" duty that enabled me to practice carving. My post was at one of the training buildings and once the classes commenced, I simply manned the gate until classes were over later in the afternoon. Sporadic visits by Chiefs or other personnel made for a lot of quiet time. I came up with an idea that made the time fly by. Our base used thin wooden spoons for coffee stirrers back then. ( They were thin, much like a tongue depressor only shaped like a spoon.) As a "Gate Guard" you're not allowed to do much of anything other than stand and watch. Carving on a thin wooden spoon was perfect. Both my knife and "spoon" could be easily hidden in my hands when someone approached. I came up with the idea of carving "names" out of the spoon. There was hardly any "chips" to see, and once again, it could be easily "put away."
Many of the Naval personnel who passed by me came to know me. I developed a good rapport with a number of Chiefs and Officers. In the morning, I'd sketch out the name of the person whom I was going to give the "spoon" to. That afternoon, on their way out, I'd offer it to them as a memento. I'd like to think that somewhere around the USA there are thin, wooden spoons with names carved on them setting on some one's shelve.
While on duty in Iceland, I show only a couple of carvings. Actually, I was really busy taking in the uniqueness of Iceland, so carving became a "fill-in" activity.

I carved in our room so I had to keep the "mess" to a minimum.













Some of the carvings have a distinctive feature that, at that time, came to be a "sign of the times." Here are the carvings that started it all...





Through the '70's and early '80's, I carved several relief name signs/plaques and in time, I put my carving case away... until February, 2009
I still have my Swiss Army Knife and the only two Exacto handles I ever bought. I guess age has the better of me and I admit that I enjoy working with the speed and fast "wood reduction" I can obtain with the Dremel, but I still find myself making a finish cut with my Exacto knives.

Wood Carving, Astronomy and RVing

Here are several of my latest pieces. I started wood carving way back in the 60's while working as a camp counselor. I got away from carving in the late 70's. While wintering in the south I thought that if I packed my carving kit I may get back into carving. I rarely painted my carvings until this year. Character carving needs color and paint to make the carving come to life. With some help of a friend, Rose, who spent years restoring dolls, she directed me toward the proper paints, brushes, etc. and I like the results.
I, like many carvers started out with Exacto knifes and a variety of blades. This year I stepped into the Dremel side of carving. The Dremel has help not only reducing my time on the piece but has allowed me to delve deeper into detail than I would with a blade alone.
I have several more pieces in the works. So far, all of my pieces have been and will be gifts. At some point I may find a piece that I may be able to sell. In the mean time, I'm proud to have a number of carvings that are being enjoyed by my friends in a few different states. Each of the pieces are "One of a Kind Wood Carving!"